Submission Check List

Browse through our submission check list organized by disciplines

Ultimate Pile Load Test

SP1 Pile Load Test

Subtitle	Principles
SP1 Pile Load Test	SP1.1 Letter from Authorized Organizations/YBPS Online System SP1.2 Code of Practice and Design Reference SP1.3 Method of Statement of Pile Load Test SP1.4 Material Properties SP1.5 Pile Design Report by Foundation Designer (Geotechnical & Structure Design) SP1.6 Architectural Drawing (Conceptual) SP1.7 Geotechnical Report (should consist adequate c, f, and SPT value for pile design calculation) and Bore Hole Profile SP1.8 Site Location Plan with Adjacent Building and Bore Holes SP1.9 Ultimate Test Pile Location Plan SP1.10 Test Pile Details (Anchor pile details if anchor method)

Subtitle

Principles

SP1 Pile Load Test

SP1.1 Letter from Authorized Organizations/YBPS Online System
SP1.2 Code of Practice and Design Reference
SP1.3 Method of Statement of Pile Load Test
SP1.4 Material Properties
SP1.5 Pile Design Report by Foundation Designer (Geotechnical & Structure Design)
SP1.6 Architectural Drawing (Conceptual)
SP1.7 Geotechnical Report (should consist adequate c, f, and SPT value for pile design calculation) and Bore Hole Profile
SP1.8 Site Location Plan with Adjacent Building and Bore Holes
SP1.9 Ultimate Test Pile Location Plan
SP1.10 Test Pile Details (Anchor pile details if anchor method)

SP2 Submission Set

Subtitle	Principles
SP2.1 Signatures	SP2.1.1 Local Design: Signature of Professional Engineer (Structure, Construction & Geotechnical) SP2.1.2 Foreign Design: Signature of Registered Foreign Professional Engineer (Structure & Geotechnical) SP2.1.3 Foreign Design: Signature of National Counterpart(PE)

Subtitle	Principles
SP2.2 Document Sets	SP2.2.1 CD for Design Drawing , Calculation and Report - 2 sets SE2.2.2 Design Report -5 sets (Manual) / 2sets (YBPS) SE2.2.3 Design Calculation - 5 sets (Manual) / 2sets (YBPS) SE2.2.4 Design Drawings - 5 sets (Manual) / 2sets (YBPS)

Working Pile Load Test Method-1

SP1 Pile Load Test (M1)

Subtitle	Principles
SP1 Pile Load Test (M1)	SP1.1 Code of Practice and Design Reference SP1.2 Method of Statement of Pile Load Test SP1.3 Material Properties SP1.4 Pile Design Report by Foundation Designer (Geotechnical and Structural Design) SP1.5 Geotechnical Report (should consist adequate c, f and SPT value for pile design calculation) and Bore Hole Profile SP1.6 Site Location Plan with Adjacent Building and Bore Holes SP1.7 Columns Loading Calculation SP1.8 Piling Plan with Test Pile Locations SP1.9 Test Pile Details (Anchor pile details if anchor method)

Subtitle

Principles

SP1 Pile Load Test (M1)

SP1.1 Code of Practice and Design Reference
SP1.2 Method of Statement of Pile Load Test
SP1.3 Material Properties
SP1.4 Pile Design Report by Foundation Designer (Geotechnical and Structural Design)
SP1.5 Geotechnical Report (should consist adequate c, f and SPT value for pile design calculation) and Bore Hole Profile
SP1.6 Site Location Plan with Adjacent Building and Bore Holes
SP1.7 Columns Loading Calculation
SP1.8 Piling Plan with Test Pile Locations
SP1.9 Test Pile Details (Anchor pile details if anchor method)

SP2 Submission Set (M1)

Subtitle	Principles
SP2.1 Signatures	SP2.1.1 Local Design: Signature of Professional Engineer (Structure, Construction & Geotechnical) SP2.1.2 Foreign Design: Signature of Registered Foreign Professional Engineer (Structure & Geotechnical) SP2.1.3 Foreign Design: Signature of National Counterpart(PE)

Subtitle	Principles
SP2.2 Document Sets	SP2.2.1 CD for Design Drawing , Calculation and Report - 2 sets SP2.2.2 Design Report -5 sets (Manual) / 2sets (YBPS) SP2.2.3 Design Calculation - 5 sets (Manual) / 2sets (YBPS) SP2.2.4 Design Drawings - 5 sets (Manual) / 2sets (YBPS)

Working Pile Load Test Method-2

SP1 Pile Load Test (M2)

Subtitle	Principles
SP1 Pile Load Test (M2)	SP1.1 Commitment Letter confirming that the conceptual architectural design will not undergo major changes that would affect the structural design (or) final architectural design drawings SP1.2 Code of Practice and Design Reference SP1.3 Method of Statement of Pile Load Test SP1.4 Material Properties SP1.5 Pile Design Report by Foundation Designer (Geotechnical and Structural Design) SP1.6 Geotechnical Report (should consist adequate c, phi, and SPT value for pile design calculation) and Bore Hole Profile SP1.7 Site Location Plan with Adjacent Building and Boreholes SP1.8 Columns Loading Calculation, Etabs Model, and Stability Checking SP1.9 Piling Plan with Test Pile Locations SP1.10 Test Pile Details (Anchor pile details if anchor method)

Subtitle

Principles

SP1 Pile Load Test (M2)

SP1.1 Commitment Letter confirming that the conceptual architectural design will not undergo major changes that would affect the structural design (or) final architectural design drawings
SP1.2 Code of Practice and Design Reference
SP1.3 Method of Statement of Pile Load Test
SP1.4 Material Properties
SP1.5 Pile Design Report by Foundation Designer (Geotechnical and Structural Design)
SP1.6 Geotechnical Report (should consist adequate c, phi, and SPT value for pile design calculation) and Bore Hole Profile
SP1.7 Site Location Plan with Adjacent Building and Boreholes
SP1.8 Columns Loading Calculation, Etabs Model, and Stability Checking
SP1.9 Piling Plan with Test Pile Locations
SP1.10 Test Pile Details (Anchor pile details if anchor method)

SP2 Submission Set (M2)

Subtitle	Principles
SP2.1 Signatures	No principles available

Subtitle	Principles
SP2.2 Document Sets	No principles available

Deep Excavation

SE1 Design Report

Subtitle	Principles
SE1 Design Report	No principles available

SE2 Submission Set

Subtitle	Principles
SE2.1 Signatures	No principles available

Subtitle	Principles
SE2.2 Document Sets	No principles available

CONCEPTUAL

A1. Urban Planning

Subtitle	Principles
1.Location Map	A1.1.1 North Point A1.1.2 Surrounding Roads and Nearest Junctions A1.1.3 Surrounding Environment with Important Cultural & Heritage Elements

WATER SUPPLY AND SANITATION

W1 Design Report & Calculations

Subtitle	Principles
W1.1 Water Supply	W1.1.1 Source of Water Supply W1.1.2 Cold & Hot Water Demand with Respect to Design PE W1.1.3 Sizing of Groundwater Reservoir and Roof Tank Reservoir W1.1.4 Water Treatment Plant (where used) W1.1.4.1 Submit Result of Sample Analysis on Physical, Chemical & Bacteriological. W1.1.4.2. Provide a flow sheet of treatment processes to remove the pollutant. W1.1.4.3. Provide Necessary Calculation of Each Process. W1.1.4.4. Provide references used in the design. W1.1.5 Sizing of Transfer Pump and Transfer Pipe W1.1.6 Head Loss Calculation at Critical Location W1.1.7 Positioning of PRV W1.1.8 Sizing of Booster for Boosting Pressure for Floors with Inadequate (Low) pressure W1.1.9 Sizing of Water Meter W1.1.10 Sizing of Hot Water Supply Facilities

Subtitle

Principles

W1.1 Water Supply

W1.1.1 Source of Water Supply
W1.1.2 Cold & Hot Water Demand with Respect to Design PE
W1.1.3 Sizing of Groundwater Reservoir and Roof Tank Reservoir
W1.1.4 Water Treatment Plant (where used)
W1.1.4.1 Submit Result of Sample Analysis on Physical, Chemical & Bacteriological.
W1.1.4.2. Provide a flow sheet of treatment processes to remove the pollutant.
W1.1.4.3. Provide Necessary Calculation of Each Process.
W1.1.4.4. Provide references used in the design.
W1.1.5 Sizing of Transfer Pump and Transfer Pipe
W1.1.6 Head Loss Calculation at Critical Location
W1.1.7 Positioning of PRV
W1.1.8 Sizing of Booster for Boosting Pressure for Floors with Inadequate (Low) pressure
W1.1.9 Sizing of Water Meter
W1.1.10 Sizing of Hot Water Supply Facilities

Subtitle	Principles
W1.2 Sanitation	W1.2.1 Sizing of Soil Branch, Soil Stack, and Vent W1.2.2 Sizing of Waste Branch, Waste Stack, and Vent W1.2.3 Sizing of Drain Pipe W1.2.4 Waste Water Treatment Plant/Waste Water Treatment System (with respect to the method used) W1.2.4.1. Submit the characteristics of the raw sewage. W1.2.4.2 Provide a flow sheet of the system used with a brief description of each process. W1.2.4.3 Provide the Necessary Calculations of Each Process. W1.2.4.4. Provide references used in the design. W1.2.5 Disposal Pump

Subtitle

Principles

W1.2 Sanitation

W1.2.1 Sizing of Soil Branch, Soil Stack, and Vent
W1.2.2 Sizing of Waste Branch, Waste Stack, and Vent
W1.2.3 Sizing of Drain Pipe
W1.2.4 Waste Water Treatment Plant/Waste Water Treatment System (with respect to the method used)
W1.2.4.1. Submit the characteristics of the raw sewage.
W1.2.4.2 Provide a flow sheet of the system used with a brief description of each process.
W1.2.4.3 Provide the Necessary Calculations of Each Process.
W1.2.4.4. Provide references used in the design.
W1.2.5 Disposal Pump

Submission Check List

Ultimate Pile Load Test

SP1 Pile Load Test

SP2 Submission Set

Working Pile Load Test Method-1

SP1 Pile Load Test (M1)

SP2 Submission Set (M1)

Working Pile Load Test Method-2

SP1 Pile Load Test (M2)

SP2 Submission Set (M2)

Deep Excavation

SE1 Design Report

SE2 Submission Set

CONCEPTUAL

A1. Urban Planning

WATER SUPPLY AND SANITATION

W1 Design Report & Calculations

Architectural